No matter which machining method is used to process the workpiece, it is necessary to consider how to improve the machining efficiency and machining quality of the workpiece without unnecessary problems and troubles. So what problems should be paid attention to when programming?

1. Carefully analyze the drawings provided by customers and determine a reasonable processing route.

2. Select a suitable tool and fill in the measured actual size into the tool card.

3. Determine a reasonable amount of cutting. Mainly the spindle speed, the amount of back cutting, the feed rate, etc.

4. Leave enough space for automatic tool change to avoid collision with the workpiece or fixture. The tool change position is recommended to be set at the machine origin.

5. In order to facilitate the inspection and debugging of the program, the main program mainly completes the tool change and the subroutine call. This procedure is simple and clear.

6. Check and test the compiled program, and pay attention to whether there is any interference between tools, fixtures or workpieces.

Machining should consider the above 6 issues when programming, so that the workpiece can be processed more efficiently when machining.