Turning processing is to use the rotary motion of the workpiece and the linear or curvilinear motion of the tool to change the shape and size of the blank on the lathe, and process it to meet the requirements of the drawing. The following small series will introduce to you about what are turning parts? What are the contents of the processing steps of turning parts, welcome to read!
 
What is a turned part?
 
Turned parts are parts processed by lathes. Common objects include rods, motor wheels, automobile half shafts, copper sleeves, pins and other circular objects. Stamping parts are processed by machines with a certain pressure such as forging presses and hydraulic presses. The specific parts include beer screwdrivers, ear picks, stainless steel basins for washing faces, air conditioner brackets for home use, shovels, spoons, etc.
Turned parts
What are the processing steps of turning parts?
 
1. Before operation
 
1. Operators must wear relevant protective equipment in strict accordance with the operating rules;
 
2. The operator should check whether all parts of the electrical appliance are normal before operation, and can start it only after confirming that there is no problem.
 
2. In operation
 
1. It is necessary to ensure that the workpiece is firmly clamped, such as tools, tools, clamps and other workpieces;
 
2. All types of machine tools should be idling at low speed after starting up to ensure that there is no problem before they can be operated;
 
3. It is strictly forbidden to put other irrelevant things on the machine table;
 
4. Operators should not remove excess iron filings by hand, but should use special tools to clean them, and they should stand in a safe position to avoid iron filings splashing when the machine tool is moving;
 
5. During the operation of the machine tool, the operator is forbidden to adjust the transmission or change the operation stroke, not to touch the working surface in processing, not to measure the size during operation, and not to transfer items across the transmission part of the machine tool;
 
6. In the process of processing, it is necessary to strictly abide by the operating rules, not to leave the work position when the machine tool is running, to cut off the power supply when leaving, to adjust the speed, stroke, tools, etc., must be stopped, not when the machine tool is running.
 
3. After the operation
 
After the work is completed, it is necessary to cut off the power supply, remove the tool, return the handles of all parts to neutral, and lock the switch box.