Turning processing is to use the rotary motion of the workpiece and the linear or curvilinear motion of the tool to change the shape and size of the blank on the lathe, and process it to meet the requirements of the drawing. Turning is a method of cutting a workpiece on a lathe using the rotation of the workpiece relative to the tool. The following editor will introduce to you the precautions and application content of turning parts processing operations, welcome to read!
 
Precautions for turning parts processing operations:
 
1. It is necessary to ensure that the workpiece is firmly clamped, such as tools, tools, clamps and other workpieces;
 
2. All types of machine tools should be idling at low speed after starting up to ensure that there is no problem before they can be operated;
 
3. It is strictly forbidden to put other irrelevant things on the machine table;
 
4. Operators should not remove excess iron filings by hand, but should use special tools to clean them, and they should stand in a safe position to avoid iron filings splashing when the machine tool is moving;
 
5. During the operation of the machine tool, the operator is forbidden to adjust the transmission or change the operation stroke, not to touch the working surface in processing, not to measure the size during operation, and not to transfer items across the transmission part of the machine tool;
 
6. In the process of processing, it is necessary to strictly abide by the operating rules, not to leave the work position when the machine tool is running, to cut off the power supply when leaving, to adjust the speed, stroke, tools, etc., must be stopped, not when the machine tool is running.